img

Our Products

RE-2558

Product Details

Overview

    The microprocessor based UL listed 8 Zone conventional fire alarm control panel, the system has 16 X 2 LCDcharacter, 8 zones detection circuit,3 common potential free contacts &2 common NAC sounder output, inbuilt Rs-485 for repeater connectivity, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.
    RE-2558 fire alarm control panel is designed with unique protocol to be used for small & medium establishments, Schools, hospitals, hotels, banks, residential / commercial building, and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.
  • Switched Mode Power Supply.
  • Modular Construction
  • Auto Resettable Fuse
  • Surge Protection for all Input and outputs.
  • Programmable AC loss delay/Trouble Remainder/Alarm Verification
  • Battery polarity reversible protection
  • Surface Mount Technology
  • Over All current consumption is low.
  • Fully complies with UL -864 and NFPA-72.
  • Rugged CRCA sheet with powder coated finish.
  • Operates on 110 – 220v 50 /60 Hz, AC Mains power supply.
  • 16×2 Dot Matrix LCD Display.
  • 4/8 Class B Style ‘B ‘ or Style ’C’ initiating device circuit (IDC).
    • All zones accept smoke detectors and any normally open contact device.
    • Any Zone can be configured as Alarm or supervisory Zone.
  • 2ClassBNotificationApplianceCircuits(NAC).
  • NAC shall be programmed as silenceable or Non Silenceable.
  • Supervisory Zone shall be Latching or Resettable.
  • Standby (battery) backup 24v DC power supply with built in charger
  • Error free Fire / Fault status in unambiguous colored LED indication.
  • System ON indication.
  • Main, Standby status audible and visual indication.
  • Battery Low visual warning with audible tone.
  • FormC relays for fire, fault and supervisory.
  • Resettable / Steady 24V D.C. Output.
  • RS 485 Communication facility (Optional).
  • Lamp Test facility.
  • All field wiring circuits are Power limited except 110 – 220v AC and Battery.
  • All field wiring circuits are supervised.
  • Walk Test facility.
  • Zone Isolation facility with loop voltage cut off.
  • Earth fault annunciation facility at 0 ohms.
  • AC Low voltage cutoff.
  • Programmable AC loss delay / Alarm verification / Trouble reminder.

Get Quote

Subscribe Your Fire Protection Partner